The MULCHER MM wide rotary cutter is equipped with five rotors. The working width of 7 metres predetermines this rotary cutter for high daily outputs. The layout of the individual mulching components guarantees a high level of crushing in combination with outstanding resistance and a robust design. The MULCHER MM wide rotary cutter is suitable for mulching both permanent grassland and crop residue after harvesting cereals or oilseed crop.
7-7 m
200-220 k
A wide rotary cutter with a robust design and a working width of 7 metres designed for large agricultural businesses, service providers, or for maintenance of large areas.
Mulching vegetation contributes to a balanced growth of above ground matter, processing ungrazed grass (bad quality fodder not grazed by the cattle), it promotes grass offsetting, and also prevents the development of weeds.
In this case, the rotary cutter chops, shortens and evenly distributes the mulched material, which is then better incorporated into the soil and also decomposes faster. Mulching is also important for mechanical prevention of diseases and elimination of pests, such as the European corn borer.
MULCHER MM wide rotary cutters are highly durable and designed for hard work. Hot-dipped galvanization of the machine provides high resistance to vegetation sap, collision with rocks or weather conditions.
Quality mulching requires a large rotor diameter and high circumferential speed. The MULCHER MM wide rotary cutter is equipped with two pairs of shaped knives on the rotor to ensure excellent quality of work. The blades can be used both for mulching grasses and processing crop residue.
When manufacturing BEDNAR rotary cutters, we use high-quality cardan shafts by Walterscheid.
When compared with the standard model,The MULCHER MM can be equipped with a stepping version of the central axle. The machine is then able to better trace any terrain unevenness and maintain the set working width. You can achieve an even better effect in combination with the tandem version of the side axles.
The transmission part of the MULCHER MM wide rotary cutter is protected against damage (for example, in the case of a collision with a rock, etc.) with a friction clutch that automatically stops all the transmission processes. The cardan shaft connecting the tractor with the gearbox is equipped with a friction clutch.
MULCHER MM can be equipped with cover plates of the main frames. The plates are smooth and minimize the sticking of plant residue on the machine.
The main component is the fan that creates a stream of air and the wind straighteners direct air to the risk areas on the machine surface. The equipment prevents dirt and plant matter from sticking on the machine surface. It improves labour safety and reduces time spent with cleaning.
Counter blades that provide the final cutting of the mulched material are installed in the front part of the mulching area to increase the chopping effect that easily increases the quality of material mulching.
The spreading deflectors ensure that the rotary cutter works perfectly as they evenly spread the mulched material. They prevent the formation of plant clumps and larger amounts of matter in one place.
The MULCHER MM wide rotary cutter is equipped with replaceable armoured plates that protect the machine frame from damage. Moreover, each rotor is protected with its own cover which enables work in an extremely low position above the ground.
No dude en ponerse en contacto con nosotros o encontrar el distribuidor de su zona.
Contacte con nosotros Encontrar un distribuidorA concise summary of the main working parts of the wide rotary cutter.
The rotary cutter is easily aggregated to the bottom or top tractor hitch. It can also be connected using the K80 ball pin.
Two pairs of shaped blades provide an excellent cutting and chopping effect. There are two blade models available – grass and corn.
The central walking axle provides excellent terrain trafficability, and even better tracing when compared with the standard model.
They protect the rotor and enable it to work in an extremely low position above the ground.
The side runners maintain the set working height.
They provide an outstanding resistance to aggressive vegetation sap or mechanical damage (e.g., collision with a rock).
It prevents dirt and plant matter from sticking on the machine surface and increases labour safety.
The device for continuous machine surface cleaning is mounted centrally on the machine to provide the best possible effect at work, and also compactness during transport.
“I decided to purchase the wide MULCHER MM 7000 with TRASH-FAN that cleans the surface of the machine due to providing services and requirements of my customers. I have processed more than 1,000 hectares with the rotary cutter in a few months. I like the workmanship, the area capacity, as well as the quality of knives that are as good as new after 1,000 hectares.”
František Imrich, Service Provider
AGRO Imrich, s.r.o.
We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your MULCHER MM wide rotary cutters to precisely match your needs.
We achieved double-crushing hard stalks, such as grain maize, sunflower, or oilseed rape, by combining the paddle-shaped blades mounted in the lower plane and straight blades mounted in the upper plane. The stalks are cut at two levels at the same time.
The paddle-shaped bent blades, cross-mounted on one plane, are suitable for mulching permanent grassland. The paddle-shaped knives create a suction effect, which lifts the grass run over by the tractor wheels and helps mulching the grass.
The main component is the fan that creates a stream of air and the wind straighteners direct air to the risk areas on the machine surface. The equipment prevents dirt and plant matter from sticking on the machine surface.
CROP RESIDUE MANAGEMENT
Processing crop residue after harvest is important for several reasons. Crop residue is a source of organic matter therefore it is not desirable to simply leave it in the field without attention. Crop residue may be unevenly spread which aggravates soil cultivation and the clumps facilitate the spread of diseases and breeding of pests.
| MULCHER MM | MM 7000 | |
|---|---|---|
| Ancho de trabajo | m | 7 |
| Ancho de transporte | m | 2,4 |
| Longitud de transporte | m | 6,1 |
| Altura de transporte | m | 3,2 |
| Velocidad TDF | RPM | 1 000 |
| Eje de rotación | vertical | |
| Número de rotores | pzas. | 5 |
| Número de cuchillas por rotor | pzas. | 4 |
| Velocidad tangencial | m/s | 36 |
| Máximo diámetro de corte | cm | 5 |
| Tipo de chasis | plegable | |
| Carga máxima sobre el eje | kg | 2 840 |
| Carga máxima sobre el engache | kg | 1 100 |
| Ángulo de copiado de las alas | -15° do +45° | |
| Potencia recomendada | hp | 200 - 220 |
| Tipo de enganche | anilla 40, 50 / K80 | |
| Peso total* | kg | 3 940 |
*according to the machine equipment
4.5-5.8 m
120-200 k
Español
Čeština
English
Deutsch
Français
Русский
polski
Magyar
Українська
Български
Dansk
Italiano
Lietuvių
Română.png){kind=small}
English – CA
English – US.png){kind=small}
Français – CA
BEDNAR FMT
