CORSA CN Seeding Bar

Inicio Siembra y Abonado Sembradoras CORSA CN Seeding Bar

A SEEDING BAR SUITABLE FOR ANY CONDITIONS

The mounted CORSA CN seeding bar is available with a working width of 6-9 metres. The seeding bar is suitable for aggregation in the three-point hitch of the tractor or the COMBO SYSTEM CS, FERTI-CART FC storage tanks, or the front FERTI-BOX FB_F hoppers, or other equipment. The seeding bar can be used in establishing densely seeded crops (cereals, oilseeds, grasses, catch crop) into prepared soil where emphasis is placed on quality crop establishment and a large area output.

6-9 m

150-250 k

Características clave

A mounted seeding bar for aggregation in the three-point hitch of the towing vehicle.

A SEEDING BAR FOR ANY CONDITIONS

The CORSA CN seeding bar continues working where other seed drills stop.

The mounted CORSA CN seeding bar is designed for establishing crops in soil that has been at least partially prepared. The seeding bar frame holds the individual double-disc drill coulters. Since there is no disc section for soil preparation, the CORSA CN seeding bar is also suitable for establishing crop in extreme conditions because there is not risk of clogging of the disc section.

PARALLELOGRAM DRILL COULTER PLACEMENT

For even placement of seeds at a constant depth level.

The double-disc drill coulters are attached to the seeding bar frame with a parallelogram. That allows the individual drill coulters to perfectly trace terrain and place seeds evenly at a constant depth level along the entire working width.

TWO INTER-ROW SPACING OPTIONS

12.5 or 16.7 centimetres.

The CORSA CN universal seeding bar can be equipped, in production, with drill coulters with an inter-row spacing of 12.5 cm suitable for most stubble breaking operations with a higher ratio of cereals in the seeding procedure, according to the customer’s requirements. The inter-row spacing of 16.7 cm is suitable for stubble breaking with large quantities of crop residue on the surface.

SEEDING AT VARIOUS DEPTH LEVELS, OR IN EVERY OTHER ROW

Establish catch crop or fodder crop.

The specially designed distribution head also allows seeding two crops at the same time, or seeding in every other row, with an inter-row spacing of 25 or 33 centimetres. This solution is suitable for establishing oilseed rape crop. When using the CORSA CN seeding bar for planting two crops in every other row, you can place each crop at a different depth level. The drill coulter support wheel can be set at various holes with a spacing of 20 mm. Adjusting every other support wheel sets a different seeding depth in the even coulters than in the odd coulters

SÅNING VED FORSKELLIGE DYBDER, ELLER I HVER ANDEN RÆKKE

FLOW SENSORS

Keep track of the throughput of each drill coulter.

The seed drill can be equipped with flow sensors on request. The device ensures that if a drill coulter gets clogged, the information is displayed on the screen. That guarantees maximum seeding precision.

EXCELLENT SEED PLACEMENT

Precisely designed drill coulter.

The double-disc seed drill with an offset disc cuts crop residue and creates a clean and prepared groove for even seed placement. There is either a standard, or carbide scraper between two discs. The seeds are then covered with fine soil and pressed down into the soil by the depth wheel. The depth wheel is available in two sizes: 330×50 mm and 330×65 mm.

SETTING OPTIONS

Of the drill coulter pressure and seed placement depth.

Setting of the drill coulter pressure
Setting the drill coulter depth

It is possible to set various drill coulter pressure according to the soil conditions. The pressure is set hydraulically or mechanically.

The double-disc drill coulter can place seeds or fertilizer at a depth of up to 8 cm. The working depth can be regulated hydraulically or mechanically.

COMBINATION WITH MULTI-PURPOSE STORAGE TANKS

The CORSA CN mounted seeding bar can be aggregated with BEDNAR storage tanks. Precise seed placement is provided by the pressurised BEDNAR design that guarantees precise batching, even in the case of larger seeding or fertiliser amounts.

FERTI-BOX FB_F
COMBO SYSTEM CS
FERTI-CART FC

The FERTI-BOX FB_F mounted front hopper has a capacity of 1,900-2,200 litres. Fertiliser is pneumatically distributed from the front hopper to the distribution head on the seeding bar.

The COMBO SYSTEM CS trailed double-chamber storage tank has a capacity of 5,000 litres per each hopper. The seeding bar is aggregated in the three-point hitch of the storage tank. The double-chamber hopper design enables seeding two types of seeds at the same time, or applying fertiliser into inter-rows together with seeding.

The FERTI-CART FC trailed storage tank has a capacity of 3,500 litres. The CORSA CN seeding bar is easily aggregated using a three-point hitch. FERTI-CART FC can be equipped with a strain-gauge weighing system on request.

¿ESTÁ INTERESADO EN ESTA MÁQUINA? ¿TIENES UNA PREGUNTA?

No dude en ponerse en contacto con nosotros o encontrar el distribuidor de su zona.

Contacte con nosotros Encontrar un distribuidor

Descripción de la máquina

A concise summary of the main working parts of the seeding bar.

CORSA CN Seeding Bar

Take a look at your future machine.

Seeding bar

Formed by double-disc drill coulters mounted on a parallelogram for perfect terrain tracing. Optional inter-row spacing of 12.5 or 16.7 cm.

Side markers

Used for making the guiding groove for continuous follow-up of the individual widths when the tractor is not equipped with GPS navigation.

Double-disc drill coulter

The drill coulter is attached to the seeding bar frame with a parallelogram. The system perfectly maintains the set working depth along the entire width of the machine.

Dividing head

Offers the option to deactivate a half of the working width.

Front support wheels

Provide perfect terrain tracing and keep the seeding bar at the set working depth.

Pre-emergent markers

Mark the rail lines for guiding the tractor set with a sprayer unit or manure spreader.

Nuestra tecnología innovadora

DRILL COULTER PSP SYSTEM

The double-disc drill coulters are attached to the seeding bar frame with a parallelogram. The design provides perfect terrain tracing and even seed placement at the same depth along the entire width of the machine.

DOUBLE EDGE DRILL COULTERS

The machine moves away from the ideal line and wobbles when seeding. That creates increased gaps, or so-called “eyes” between the individual rides in the field (with standard arrangement of the drill coulters). All those deficiencies are eliminated with our innovative design – the double edge drill coulters. When there is a deviation from the ideal line, the growth is only thinned locally without any significant gaps, or eyes“.

WHAT DO THE FARMERS HAVE TO SAY?

“I like the seeding bar. It helps us manage seeding by the agricultural deadlines and it also helped us expand the use of the COMBO-SYSTEM storage tank, which we use in aggregation with other BEDNAR machines.”

Václav Ryšavý, Machine Operator
Unčovice Farming Cooperative

Accesorios

We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your CORSA CN mounted seeding bar to precisely match your needs.

Drill coulters

Drill coulters with an inter-row distance of 16.7 cm

The inter-row distance of 16.7 cm provides better material throughput. It is suitable for technologies with larger quantities of crop residue on the surface.

Drill coulters with an inter-row distance of 12.5 cm

The inter-row distance of 12.5 cm offers plants better competitiveness against weeds and improves the engagement of the crop.

CONFIGURE YOUR OWN
CORSA CN Seeding Bar

Configurar

AGRONOMICAL GUIDE

CROP ESTABLISHMENT
Each crop requires specific conditions for its establishment, based on the selected soil cultivation technology and weather conditions. Generally, the crop should be established by the specified agronomic deadline to meet all the preconditions for achieving the required yield.

Crop establishment options

Datos técnicos

Se puede navegar por la tabla desplazándose lateralmente.

CORSA CN		CN 6000 Light	CN 8000	CN 9000
Ancho de trabajo	m	6	8	9
Ancho de transporte	m	3	3	3
Longitud de transporte	m	2	2,9	2,9
Drill coulter spacing	cm	12,5 / 16,7	12,5 / 16,7	12,5 / 16,7
Number of drill coulters	pzas.	48 / 36	64 / 48	72 / 54
Potencia recomendada	hp	150 - 200	180 - 230	200 - 250
Tipo de chasis		plegable	plegable	plegable
Peso total*	kg	2 200 - 3 000	2 600 - 3 600	2 800 - 3 800