Intense soil cultivation with excellent mixing of crop residue is an important precondition for proper soil structure. The FENIX FO deep cultivator has three rows of tines providing intense soil mixing up to a depth of 35 centimetres. The high frame clearance in combination with NON-STOP protection of each tine allows working in demanding conditions as well. To achieve optimal properties of the towing vehicles, The FENIX FO is equipped with a traction booster of the tractor rear axle.
5-35 cm
5.3-5.9 m
300-450 k
A deep cultivator for deep soil cultivation of up to 35 centimetres, including shallow stubble ploughing after harvest.
The FENIX FO cultivator can carry out deep loosening up to the maximum depth of 35 cm. Deep loosening is recommended especially before seeding deep-root crops, or in the autumn, as it prepares the foundation for the formation of a strong root system, through which the plant will absorb water and nutrients. Deep loosening helps achieve an adequate soil structure with the proper size of the individual soil particles, and it appropriately starts the functional and water regime of soil.
The design and a wide range of chisels make the FENIX FO cultivator suitable for shallow stubble ploughing up to 15 centimetres. We recommend fitting the FENIX FO cultivator with chisels with wings for excellent soil profile processing during stubble breaking. A properly performed stubble ploughing is important for the elimination of the growth of weeds, incorporation of crop residue into soil, it reduces the evaporation of soil moisture, and starts the growth of unwanted seeds.
The FENIX FO deep cultivator has working tines arranged in three rows, with a spacing of 31 centimetres between the individual tines. This arrangement brings an excellent loosening and mixing effect because the soil is undercut along the entire machine width with subsequent crop residue mixing.
The FENIX FO deep cultivator is a suitable machine for deep soil cultivation as well as shallow stubble ploughing after harvest. The FENIX FO cultivator can be equipped with a whole range of working parts in relation to the soil character or customer’s requirements. The three rows of tines are followed with a backfilling section, which can be fitted either with backfilling rods or discs. For perfect soil levelling, the FENIX FO cultivator can be equipped with the Crushbar leveller in front of the rear rollers.
The FENIX FO deep cultivator can be equipped with four types of working chisels, which let you adjust the machine for deep loosening or shallow stubble ploughing after harvest. A properly selected sweep is also important in terms of the character of the soil to be processed, or the season.
When processing soil in extreme conditions, or when working in heavy soils, the towing vehicle may frequently slip, which increases fuel consumption and reduces performance. The FENIX FO deep cultivator can be equipped with an interesting solution of the tractor traction booster. This technical design considerably helps achieve excellent towing properties.
The FENIX FO deep cultivator can be equipped with ballast weight of 200 kilograms on request. It is recommended to equip the FENIX FO cultivator with ballast weight namely when the rear double rollers are used, as the ballast weight improves the even machine weight distribution and adds extra weight to the drawbar.
The FENIX FO deep cultivator can be equipped with the BEDNAR ALFA DRILL seeding unit while in production, for seeding catch crop and small-seed plants during stubble breaking, all in one pass. The time and fuel savings are considerable. The seeding unit has a capacity of 400 litres.
The FENIX FO cultivator can be equipped with support wheels for perfect terrain tracing. They ensure that the field is evenly cultivated at the set working depth along the entire width of the machine.
Each chisel is followed with one ring (in the case of the double roller) which compacts the surface soil along the same trajectory as the chisel works. This provides better reserve compaction of the cultivated soil profile and improves the emergence of unwanted seeds.
No dude en ponerse en contacto con nosotros o encontrar el distribuidor de su zona.
Contacte con nosotros Encontrar un distribuidorA concise summary of the main working parts of the cultivator.
The hydraulic cylinder with an accumulator adds extra weight to the rear tractor axle and helps reduce slipping and improves towing properties.
Provide excellent terrain tracing and maintain the set working depth along the entire width of the machine.
Ensures excellent undercutting and mixing of crop residue with soil. There are four types of chisels available to accommodate to the conditions.
Distributes weight evenly and contributes to a higher machine stability.
Helps level the soil surface and crumbles larger clods before the final surface consolidation.
Create an ideal fine soil structure and close the soil surface to prevent evaporation.
Distributes and finishes surface levelling after the packers.
The device consists of a hydraulic cylinder and accumulator mounted on the drawbar of the cultivator. The hydraulic cylinder with an accumulator adds extra weight to the rear tractor axle. This technical design considerably helps achieve excellent towing properties, and reduces slipping and fuel consumption.
The individual tines are spring-loaded using a simple maintenance-free NON-STOP spring protection with a tension force of 700 kg. This design guarantees a long service life, easy swinging of the tine upwards in the case of a collision with an obstruction, and above all, maintaining the set working depth up to 35 centimetres.
The system of profile fertilisation is one of the most efficient methods to maintain a sufficiently balanced nutrient supply in soil, not only in the arable horizon, but also in deeper layers of the soil profile. This innovative method of fertiliser application connected to deep soil cultivation is not only suitable for replenishing deficit nutrients in soil to reach a balanced level of a good supply, but also to improve accessibility of nutrients to plants, and it also has a positive effect on the growth of the root system.
We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your own FENIX FO cultivator to precisely match your needs.
Provide excellent terrain tracing and maintain the set working depth along the entire width of the machine.
Maintain the set working depth along the entire machine width, help with terrain tracing and prevent machine swinging.
Used for levelling surface before the rear packer. Suitable equipment for machines used in lighter soils.
Levelling rotary discs that perfectly level the surface, adjustable according to the soil conditions. Suitable equipment for machines used in heavier soils.
Used for even distribution of larger soil particles along the entire machine width.
V-RING is a heavy steel packer suitable for intense crumbling and reverse soil compaction. The packer is suitable for all types of soil. Packer diameter 630 mm. Weight: 169 kg/m (including scrapers).
V-RING is a packer with individual rings shaped in a V. The packer has an outstandingly low stickiness, which prevents the packer from clogging when wet. The rows are offset, which provides an excellent self-cleaning effect. The double packer increases machine stability at work. Packer diameter 630 mm. Weight: 162 kg/m.
The U-RING packer is a double-row steel packer. The rows are offset, which provides an excellent self-cleaning effect. The packer is great for crumbling, and the U-shape rings and the low risk of clogging make it suitable for work in wet conditions. The double packer increases machine stability at work. Packer diameter 600 mm. Weight: 230 kg/m.
The segmented packer is made of massive steel parts for perfect compaction, suitable for all types of soil. The individual segments perfectly crumble clods. Packer diameter 530 mm. Weight: 202 kg/m (including scrapers).
The leveller in front of the rear double packers is used for levelling off any unevenness after the previous section. The packers only consolidate soil, they do not level it. The outcome is a perfectly levelled field.
DEEP SOIL CULTIVATION
FENIX depth cultivators are suitable tools for deep soil cultivation of up to 35 centimetres. The optimally designed layout of the individual tines provides excellent soil profile undercutting and mixing of crop residue with soil. Deep loosening provides soil with the proper structure, with the properties of a fungus that is able to absorb precipitation and provide water to roots in the dry season.
| FENIX FO | FO 5003 | FO 6003 | |
|---|---|---|---|
| Ancho de trabajo | m | 5,3 | 5,9 |
| Ancho de transporte | m | 3 | 3 |
| Longitud de transporte | m | 9,03 | 9,03 |
| Altura de transporte | m | 4 | 4 |
| Número de brazos | pzas. | 17 | 19 |
| Profundidad de trabajo* | cm | 35 | 35 |
| Tipo de protección | horizontal | horizontal | |
| Distancia entre brazos | cm | 31 | 31 |
| Espaciamiento entre filas | cm | 93 | 93 |
| Despeje del chasis | cm | 85 | 85 |
| Potencia recomendada | hp | 300 - 350 | 350 - 450 |
| Tipo de enganche | 2 puntos CAT. III / 3 puntos CAT. II-III / anilla 40, 51 / K80 | 2 puntos CAT. III / 3 puntos CAT. II-III / anilla 40, 51 / K80 | |
| Carga máxima sobre el eje | kg | 8 120 | 8 120 |
| Carga máxima sobre el engache | kg | 760 | 910 |
| Dimensiones neumáticos de transporte | 400/70-24, 405/70-24 | 400/70-24, 405/70-24 | |
| Peso total** | kg | 8 880 | 9 030 |
* depends on soil conditions ** according to the machine equipment
Español
Čeština
English
Deutsch
Français
Русский
polski
Magyar
Українська
Български
Dansk
Italiano
Lietuvių
Română.png){kind=small}
English – CA
English – US.png){kind=small}
Français – CA
BEDNAR FMT
