shop.bednar.com Filtrar máquinas Configurar la máquina Búsqueda
shop.bednar.com Filtrar máquinas Configurar la máquina Búsqueda
Menu
Todos los productos Configurar la máquina Máquinas de filtrado
#
Siembra y Fertilización
#
Labranza
#
Manejo de rastrojo / desbroce
#
Labranza entre filas / Strip Till
×
¿Qué estás buscando?
#

SWIFTER SM

A wide seedbed cultivator for seedbed preparation in one pass

Configurar Catálogo Reproduce el video
SWIFTER SM
Inicio Laboreo del suelo Preparadores de cama de siembra SWIFTER SM Wide Seedbed Cultivator

THE WIDEST CULTIVATOR ON THE MARKET

Since they were introduced on the market, SWIFTER SM wide cultivators are the largest cultivators with a working width from 14.2 to 18.2 metres, suitable for the most powerful tractors. As the time frame for soil cultivation decreases, the demands of large agricultural businesses on the quantity of processed hectares increases. The widest SWIFTER SM cultivator can process more than 230 hectares per day. The independent spring-loading of the working sections contributes to perfect terrain tracing, even at such widths. The transport, as well as folding and unfolding the machine are very easy and safe thanks to the BAR-LOCK system.

#

2-12 cm

#

14.2-18.2 m

#

400-600 k

Características clave

A wide cultivator with a standard design suitable for traditional soil cultivation, as well as minimization systems.

UP TO 8 OPERATIONS IN ONE PASS

Creating a seedbed for proper and even crop emergence.

Combining several operations into one means fewer passes through the field and lower costs of soil preparation. The front leveller perfectly levels any unevenness. The front slatted roller crumbles the clods. The main working section undercuts, aerates and warms up the soil layer. The final clod crumbling is provided by various types of rollers in combination with other equipment behind the rollers.

AŽ 8 PRACOVNÍCH OPERACÍ V JEDNOM PŘEJEZDU
EXCHANGEABLE WORKING SECTIONS

Adjusting soil cultivation to the needs of the crop.

  • Sweep section
  • SB sweep section
  • Gamma-point section

A sweep working section (summer and autumn soil cultivation – winter cereals, oilseed rape)

This working section can be used for summer and autumn preparation when soil needs to be loosened, undercut and mixed after the previous harvest. The 270 mm sweeps in two overlapping rows undercut the soil profile along the entire machine width, creating a firm bottom. At the same time, soil is aggressively processed thanks to the working angle of the sweeps, creating a loosening top layer. Each sweep is mounted on a flexible tine that provides a 3D effect (horizontal and vertical movement) which protects the sweep from damage.

SB sweep section with spring sweeps (spring soil cultivation – sugar beet)

The section is especially suitable for spring cultivation before seeding sugar beet where it is required to adequately manage spring moisture, but still prepare a precise seedbed. The sweep angle does not mix soil vertically, but the soil is still undercut in the whole area thanks to the overlapping sweeps that are 170 mm wide. Another benefit is the reduced demand on the towing vehicle power.

Gamma-point working section (spring soil cultivation – spring cereals, corn)

This section is suitable for early spring operations, such as required before seeding barley. The four rows of gamma points at a negative angle aerate and warm up soil without bringing wet particles to the surface, which preserves winter moisture. It is important for a fast start of the growth of spring crop. The spring-loading of each tine enables working at high speed. The gamma points for this section are also available in the LONG LIFE version.

Skær SB-skær Gammatænder
HIGH DAILY OUTPUTS OF UP TO 230 HA/DAY

Make the most of your tractor power.

The SWIFTER SM wide cultivator is designed for aggregation with the most powerful tractors on the market, such as quadtrac tractors. In combination with a working width of up to 18 metres, the high engine power, and the working speed, it is possible to achieve high daily outputs of up to 230 ha. Therefore, there is no need to deal with two-shift operation.

VYSOKÉ DENNÍ VÝKONY AŽ 230 HA/DEN
SIMPLE DESIGN

Does not require many points of lubrication.

SWIFTER SM cultivators only have two side frame sections, unlike other competitive products in this category. The structural design of the machine reduces the number of hydraulic cylinders where side frame pressure could be lost. This design also reduces the number of points of lubrication, the overall wear of the machine, and it simplifies manipulation with the machine, both in the field and on the road.

JEDNODUCHÁ KONSTRUKCE
PROVEN DESIGN

Do not lose time, work at headland without having to lift the machine.

The design of the SWIFTER SM cultivator enables turning the machine at the headland without having to lift the working sections. Even so, we recommend turning on the headland with slightly excavated working sections and a larger turning radius. The fixed connecting rods of the BAR-LOCK system stabilize the side frames not only when turning, but also at higher working speed.

PROVĚŘENÁ KONSTRUKCE
BAR-LOCK SYSTEM

Quick two-minute machine folding and unfolding.

BAR-LOCK is a lock bar system. The system ensures a continuous, easy and safe unfolding of the machine from the transport to the working position, as well as machine reversing. Also, it secures the connecting rods of the side frames with the drawbar when in the working position. The entire operation is done from the comfort of the tractor cabin.

BAR-LOCK SYSTÉM

¿ESTÁ INTERESADO EN ESTA MÁQUINA? ¿TIENES UNA PREGUNTA?

No dude en ponerse en contacto con nosotros o encontrar el distribuidor de su zona.

Contacte con nosotros Encontrar un distribuidor

Descripción de la máquina

A concise summary of the main working parts of the seedbed cultivator.

SWIFTER SM Wide Seedbed Cultivator

Take a look at your future machine.

# # # # # # # # #
Drawbar

A drawbar with the BAR-LOCK folding system for easy machine folding and unfolding during two minutes.

Tractor track cultivators

Used for loosening hardened tractor tracks.

Front crumbling roller

Provides initial crumbling of larger soil particles and clods.

Working section

A selection of three different versions (2 rows of sweeps/ 4 rows of gamma points / 2 rows of SB sweeps) as needed for soil cultivation for the crop.

Levelling bar after sweeps

It levels off the soil surface after the sweep or gamma-point section.

Rear rollers

The double-row crosskill rollers contribute to perfect crumbling of clods created by the sweep or gamma-point section.

Rear equipment

The high circumferential speed of the finish roller provides intense crumbling.

Support wheels

Used for stabilizing the side frames and provide perfect tracing of terrain unevenness.

Nuestra tecnología innovadora

COMPRESSING SPRING

Most seedbed cultivators equipped with crosskill rollers incur slackness between the individual crosskill segments after working for some number of hectares. We use a compressing spring in SWIFTER cultivators, mounted on the shaft where the crosskill rollers are as well. The spring continuously presses on the crosskill segments and eliminates slackness between the individual segments.

CRUSHBAR LEVELLER

The front hydraulic Crushbar leveller allows the operator to ideally adjust the working angle of the leveller according to the field conditions in the comfort of the cabin. When compared with a mechanically controlled leveller, it is possible to achieve savings of up to 1 litre of Diesel per hectare.

SLATTED ROLLER WITH A REPLACEABLE PIN

The slatted roller with a diameter of 370 mm and with a replaceable pin consists of a casing with an internal cone and a pin with an external cone. When the pin is damaged, it is not required to replace the whole slatted roller, but only the pin.

MAINTENANCE-FREE BEARINGS

Roller bearings are adjusted to the high circumferential speed and are maintenance-free. The operator thus does not have to regularly lubricate each bearing, which there are many on a seedbed cultivator. Multiple gaskets prevent contamination of the bearing and the reinforced gasket design reduces its damage.

WHAT DO THE FARMERS HAVE TO SAY?

“A perfectly prepared seedbed is our priority and I can confirm that the SWIFTER is the only machine that has always come through in our conditions. That is why our company already owns five wide cultivators. They are maximally used in the main season, and SWIFTER cultivators basically provide all the preparation, working literally 24 hours a day.”

Ing. Vítězslav Navrátil,
Chairman of the Board of Directors, ROSTĚNICE a.s., (district of Vyškov, CZ)

Accesorios

We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your own SWIFTER SM wide seedbed cultivator to precisely match your needs.

Front equipment

Telescopic track eradicators

A track eradicator with an adjustable width. It is used for loosening hardened tracks created by the towing vehicle.

Track eradicators

The solid track eradicator is used for loosening hardened tracks created by the towing vehicle.

Front leveller

Hydraulic front leveller

It levels off rough unevenness before the follow-up working parts. The hydraulic control makes it possible to immediately respond to any terrain unevenness from the tractor cabin.

Front rollers

Tube roller

The screw-shaped tube roller formed by rods crumbles the clods on the field surface.

Slatted roller

The screw-shaped slatted roller formed by rods crumbles the clods on the field surface. Its design achieves an excellent crumbling effect, even in the rough furrow.

Rear rollers

Double-row slatted rollers with a diameter of 270 mm

Suitable for year-round intense cultivation of light soils. The rollers with a diameter of 270 mm create the effect of a “soil milling tool”.

Double-row crosskill rollers with a diameter of 350 mm for rocky soils

An ideal design for all types of soil with rocks. The large spacing between rows prevents rocks from getting stuck and blocking the rollers. The universal frame enables increasing the spacing between the rows of rollers – a smaller distance provides a self-cleaning effect even in wet conditions, a larger distance provides a sufficient space in rocky soils.

Double-row slatted rollers with a diameter of 370 mm

Suitable for year-round intense cultivation of light soils. The rollers with a diameter of 370 mm create the effect of a “soil milling tool”.

Double-row crosskill rollers with a diameter of 350 mm

An ideal design for all types of soil. High-quality cast-iron rollers with a diameter of 350 mm for fine precision crumbling with a self-cleaning effect.

Optional equipment to be attached after the rear rollers

Leveller mounted after the crosskill rollers

It creates an absolutely levelled field, 100% prepared for planting even the smallest seeds, such as spring barley, poppy, or mustard.

Leveller mounted after the slatted rollers

It creates an absolutely levelled field, 100% prepared for planting even the smallest seeds, such as spring barley, poppy, or mustard.

Finish roller 270 mm

It provides intense crushing thanks to the high circumferential speed, known as the effect of a soil milling tool. Achieve maximum clod crumbling in combination with the crosskill rollers.

CONFIGURE YOUR OWN
SWIFTER SM Wide Seedbed Cultivator

Configurar Catálogo

AGRONOMICAL GUIDE

SEEDBED CULTIVATION
Soil preparation is an important operation for the formation of a uniform and balanced seedbed prior to crop establishment. Each crop and field requires different soil preparation based on the climate, or the chosen date of cultivation. The aim of the seedbed cultivation is to create an ideal soil structure in the field, with a harder bottom and loose top soil layer, to level the field after previous operations, and to open, warm up and aerate the soil profile for even crop emergence.

Do you know how to prepare soil properly?

Datos técnicos

Se puede navegar por la tabla desplazándose lateralmente.
SWIFTER SMSM 14000SM 16000SM 18000
Ancho de trabajom14,216,218,2
Ancho de transportem333
Longitud de transportem13,614,615,6
Altura de transportem444
Profundidad de trabajo*cm2 -12 2 -12 2 -12
Número de brazospzas.566472
Número de rejas (Sección SB)pzas.104118132
Número de rejas GAMApzas.136152168
Potencia recomendadahp400 - 500450 - 550500 - 600
Máxima carga sobre el eje (1)kg8 6009 55010 500
Máxima carga sobre el eje (2)kg5 5505 8006 050
Carga máxima sobre el engachekg200200200
Tipo de engancheanilla 51, 55, 62, 71, 73anilla 51, 55, 62, 71, 73anilla 51, 55, 62, 71, 73
Peso total**kg14 25015 55016 750

* depends on soil conditions ** according to the machine equipment

Piezas de desgaste

Galería / Medias

PRODUCTOS RELACIONADOS

SWIFTER SE

SWIFTER SE širokozáběrový předseťový kompaktor
#

8.2-12.2 m

#

220-380 k

#

2-12 cm

Ver

FORMULARIO DE CONTACTO

Necesita ayuda para elegir? Está interesado en una demostración de la máquina? Contáctenos!

    aquí.*

    JOY OF FARMING
    #
    Shop BEDNAR
    #
    Encontrar concesionario
    #
    Probar productos
    #
    Descargar catálogo
    #
    Dealer Area