CONFIGURE YOUR OWN
CADDY CD Tool Carrier
You are one step closer to your new machine.
You can try all the equipment in our configurator,
or read about it in the brochure.
CADDY CD is a versatile tool carrier with the maximum lifting capacity of 5,000 kg, designed for aggregation with tractors without the three-point hitch, or without a sufficient lifting capacity. The carrier can also be aggregated with track-laying tractors that do not lose their output as the three-point hitch is not used.
The CADDY CD universal carrier is a smart solution for aggregation of mounted and semi-mounted machines with tractors without the three-point hitch.
CADDY CD is a universal tool carrier designed for tractors without the three-point hitch, which is a typical fitting of tractors in every country. The CADDY CD tool carrier enables such tractors to work with both mounted and semi-mounted machines.
The CADDY CD universal carrier is equipped with a three-point hitch, category III, or category IV on request, which enables aggregation with mounted or semi-mounted machines with a maximum weight of 5,000 kg.
Wide-base tyres with a dimension of 14.5/80-18 provide high stability of the machine during transport without swaying.
TERRALAND TN is a universal chisel plough designed for deep cultivation up to the maximum depth of 65 centimetres. The machine can get the required air and moisture to the bottom soil layers, disrupt the hardened soil layers and do intense loosening in one pass.
The TERRASTRIP ZN is a type of a deep cultivator designed for strip-till soil cultivation. The deep strip-till cultivator is suitable for preparation of land up to a depth of 55 cm, in strips before seeding wide-row plants, such as corn, soya or sunflower.
STRIP-MASTER EN is a cultivator for strip-till soil cultivation, with a maximum working depth of 25 centimetres. It can be used in soil cultivation before seeding wide-row crops (corn, oilseed rape, sugar beet).
Do not hesitate to contact us or find the dealer for your area.
Contact us Find a dealerA concise summary of the main working parts of the universal carrier.
Used for connecting the universal carrier to the towing vehicle.
It is located in the front part of the machine to eliminate the negative forces affecting the tractor hitch.
Enables safe parking of the carrier.
Designed for aggregation of mounted and semi-mounted machines in the three-point hitch. Category III or IV hitch
A hydraulically adjustable axle for easy aggregation with machines.
You are one step closer to your new machine.
You can try all the equipment in our configurator,
or read about it in the brochure.
CADDY CD | CADDY CD | |
---|---|---|
Transport width | m | 2,9 |
Transport length | m | 4,9 |
Transport height | m | 1,9 |
Maximum rear hitch lifting capacity | kg | 5 000 |
Maximum axle load | kg | 1 550 |
Maximum hitch load | kg | 800 |
Hitch type | 3-point hitch II, III, IV / lug 40, 51, 55, 62, 71, 73 / K80, 110 | |
Transport tyre dimensions | 14,5 / 80 - 18 | |
Total weight* | kg | 2 350 |
*according to the machine equipment